BMPCC Battery & Power Distribution Box
Since I received my BMPCC(which I love), I’ve been frustrated with the lack of affordable power options that would work on extended shoots. So I decided to build my own. The project uses off-the-shelf parts and isn’t extremely difficult to put together. Some simple knowledge of soldering, drilling holes, and generally fitting things inside a box are needed. Other than that, it’s definitely in the realm of most DIYers like myself. I’m not an electronics expert, but I consulted some friends and family who are and ended up with a pretty affordable and awesome solution. And it’s not just for the BMPCC. This could be used with pretty much any camera rig.
You can see here it works with the battery box I built as well as commonly found commercial battery belts:
BMPCC Power Distribution Box with Battery Belt
After having my Eclair NPR’s gate modified to Ultra 16mm several years ago, I started looking into affordable lenses that would cover the new, wider frame. Since my NPR has both the Eclair CA-1 and c-mount on a handy turret, I decided c-mount lenses were probably the way to go because they were relatively cheap and fairly abundant. But, I needed ones that could cover the frame without vignetting… if that was even possible. I had shot plenty of film in Standard 16mm and Super 16mm with Arri and PL mount lenses, but Ultra 16mm and the c-mount was new to me at the time.
Ultra 16 frame size = 11.66 mm x 6.15 mm
Super 16mm frame size = 12.52 mm x 7.41 mm
BMPCC sensor size = 12.48 mm x 7.02 mm